Lượt xem: 337

Bộ điều khiển chiều cao mỏ cắt Plasma XPTHC-100III

Mã sản phẩm : 1484387797

Hãng sx: Wuxi Longteng Model: XPTHC-100III Xuất xứ: Trung Quốc

0
Số lượng:

    Features

    Stand alone THC, works with almost any plasma cutter, sale over 2000 sets per year

    No need software, all functions can be easily operated on THC(as picture showed)

    1. New operation pane,

    2. Support Dynamic pierce

    3. Better anti-interference.

    AAuto Initial Height Sensing(IHS)

    Torch Retaining Cap IHS and Proximity Switch IHS (NPN and PNP), Proximity

    Switch IHS is backup for Torch Retaining Cap IHS for cutting dirty/rusty workpiece, needing the Anti-Collision Fixture designed by HYD (optional ).

    BTorch Anti-Collision Function

    We designed Touch-Up circuit for Anti-Collision Function. No matter it is on Auto Control Model or Manual Control Model, when torch head touches the workpiece, THC would automatically lift torch up to IHS height. So with XPTHC-100, even in Manual Control Model, user doesn’t need to worry about torch head crashing.

    CFreeze Auto Height Control on Corner Signal

    XPTHC-100 can recognize Corner Signal from CNC and freeze Auto Control Model on receiving this signal, and we have a unique design to backup this function. We set 30V (adjustable) as Turning Point according to our years practice. When the Actual Arc Voltage is higher than Set Arc Voltage over 30V, THC Auto Control Mode freezes to avoid torch head diving, until it goes back to 30V range. This Over Voltage protection can avoid torch diving on voltage spikes (Corner Turning, Kerf Crossing) effectively.

    D. Set Pierce Time

    Set the Button (Set PIERE) to set Pierce Time.

    E. Manual Operation

    Many functions can be Manually operated on THC Operation Panel such as setting Auto/Manual, Up and Down, testing of IHS and Arc Start….etc

    F. Arc Voltage Divide

    Isolation Voltage Divide detection, the Voltage Divide ratio is 100:1/50:1. And XPTHC-100 supports different HF plasma.

    D. Dynamic pierce

    Basic specification

    Full Name of Product

    Arc Voltage Torch Height controller

    Product Model

    XPTHC-100

    Dimensions

    L*W*H: 320*260*90(mm)

    Supply voltage

    AC24V±10% 50Hz/60Hz

    Lifting motor

    DC24V DC motor

    Drive Method

    PWM (pulse width modulation )

    Output current

    1A~4A, the maximum is 6A

    Output power

    100W

    Working temperature

    Torch height controller: -10℃~60℃

    Initial height sensing

    Torch Retaining Cap IHS and Proximity Switch IHS

    Voltage Divide

    100:1/50:1

    Control Accuracy

    ±1V~±3V (adjustable by user)

    Cutting Torch Lifting Speed

    500 m/min~4000m/min(adjustable by user,over 4000m/min available.)

     

Sản phẩm liên quan

Đang cập nhật